Brand | ANADIG |
Brand | ANADIG MAKE |
Output | common relay |
Alarm Indicator | One lead for each |
Sensor Open Indication | Open Message |
Sensor Short Indication | Short Message |
Cal Check | Provided |
Signal Reset | Provided |
Range | 0-100 degree C |
Display | 4 Digit For Parameter 2 Digit For Channel 2 Digit For Function |
Alarm | individual Alarm |
Model | CAKT-02 |
Accuracy | +/- 0.5% FSD +/- 1 Digit |
Channels | 24 Nos. |
Power Supply | 220 V AC 400 Hz |
Zero Check | Provided |
Sensor | 3 Wire PT-46 |
Alarm Contacts | NC-C-No Contact |
Scan Time | Adjustable 1 - 20 Sec. |
Input | K-Type Thermocouple |
Accuracy | +/-0.5%FSD, +/-1 digit. |
Resolution | 1C |
Terminal | Phoenix terminal Strip. |
Alarm Output | Single relay with 2-change over potential free contact (NC-C-NO) |
Range | 0-800C |
Display | 3 1/2 Digit 7 Segment Half inch super bright LED type (4 -Digit) |
Room Temperature Compensation | Automatic Self Compensation |
Supply Voltage | 127VAC+/-10%,50Hz. |
Specifications:
1 | Input Sensor | Thermocouple (K Type) |
2 | Range | 0°C To 800°C |
3 | Display | 31/2 DIGIT 7 Segment 1/2" size super bright LED type (4digit) |
4 | Accuracy | +/-0.5%FSD, +/-1 digit. |
5 | Resolution | 1°C |
6 | Room Temperature Compensation | Automatic (Self Compensated) |
7 | Terminal | Phoenix terminal Strip. |
8 | Supply | 127VAC+/-10%,50Hz. |
9 | Alarm Output | Single relay with 2-change over potential free contact (NC-C-NO) |
*Your information is safe with us.
Alarm Indicator | One LED for Each Channel |
Brand | ANADIG MAKE |
No. Of Input | 6 |
Sensor Short Indication | Open Message |
Alarm Contacts | NC-C-No Contact Common For All Channel |
Cal Check | Provided |
Scan Time | 1-20 Sec Adjustable |
Alarm | Individual Alarm |
Accuracy | 0.5% Of FSD ,1 Digit |
Zero Check | Provided |
Output | Common Relay |
Power Supply | 220VAC, 400Hz |
Sensor Open Indication | Open Message |
Sensor | 3 Wire PT-46 RTD |
Display | 4 Digit For Parameter 2 Digit For Channel 2 Digit For Function |
Range | 0-100C |
Signal Reset | Provided |
Model | CAKT-06 |
Channels | 12Nos. |
Range | 0-1 M°C |
Accuracy | 0.5% Of FSD + 1 Digit |
Sensor | 3 Wire PT-46 |
Scan Time | Adjustable 1 - 20 Sec. |
Display | 4 Digit For Parameter 2 Digit For Channel 2 Digit For Function |
Alarm | Individual Alarm |
Alarm Contacts | NC-C-No Contact Common For All Channel |
Alarm Indicator | One LED for Each Channel |
Power Supply | 220VAC, 400Hz |
Sensor Open Indication | Open Message |
Sensor Short Indication | Short Message |
Zero Check | Provided |
Cal Check | Provided |
Signal Check | Provided |
Signal Reset | Provided |
Output | Common Relay |
Brand | ANADIG |
Range | 0C - 125C |
Display | 4 display - 3/ 4 digit 1/2 |
Sensor Open Indication | 1 |
Resolution | 0.1C |
Scan time | 1-10 second (setting is inside the instrument) |
Input | PT-100 RTD |
Accuracy | +/-0. 5% fsd, +/-1 digit |
Input | rtdpt 100 din 43760 |
Display | 4 display - 3/ 4 digit 1/2" for parameter 2 display -5n size for channel |
Range | 0°C - 125°C |
Resolution | 0.1°C |
Accuracy | +/-0. 5% fsd, +/-1 digit |
Scan time | 1-10 second (setting is inside the instrument) |
Sensor | pt100rtd |
Sensor open | indicate -1 |
Input | rtd pt100 din 43760 |
display | 3/4 digit seven segmented red LED |
super bright | |
Range | 0°C - 125°C |
Resolution | 0. 1°C |
Accuracy | +/-0. 5% fsd, +/-1 digit indication |
Sensor | pt 100 rtd |
Alarm contact | potential free contact (nc-c-no) two |
changeover contact | |
Alarm relay | 5 amp at 230 Vac |
Terminal | Phoenix 2. 5sq. mm. Terminals |
Supply | 127 Vac, +/-10% 50 Hz |
Alarm signal | For each module individual set table throughout the range |
Brand | ANADIG |
Input | RTD PT100 DIN 43760 |
Range | 0 Degree C-125 Degree C |
Sensor | PT 100 RTD |
Scan Time | 1-10 Second (Setting is inside) |
Model | ACT 054 |
Display | 2 Digit -1/2 |
Enclosure | IP65 |
Indicator | Indicate -1 |
Accuracy | +/-0.5% FSD,+/-1 Digit |
We are prominent manufacturer and exporter of Shaft and Gear Box Temperature Monitoring Systems. In addition, these sensors are tested on various parameters after the procurement. Offering high performance and durability, our range of instruments can also be customized as per the client. It is available at market leading prices.
36 point temperature Scanner With programmable alarm set points & relays for SNF class warships.
*Your information is safe with us.
Brand | ANADIG MAKE |
Alarm Indicator | Common For All Channel |
Cal Check | Provided |
Signal Reset | Provided |
Range | 0-100C |
Alarm | Individual Alarm |
Scan Time | Adjustable 1-20 Sec |
Model No. | Cakt-06 |
Alarm Contacts | NC-C-NoContact |
Power Supply | 127V AC, 50Hz |
Sensor Open Indication | OPEN Message |
Output | Common Relay |
Accuracy | 0.5%Of FSD l Digit |
Input Sensor | PT-46 Sensor |
Display | 4 Digit For Parameter 2 Digit For Channel 2 Digit For Function |
Sensor Short Indication | SHORT Message |
Zero Check | Provided |
No. of CHannels | 6 |
Model | CAKT-05 |
Channels | 06 Nos. |
Range | 0-100°C |
Accuracy | 0.5%OfFSD±l Digit |
Sensor | 3 Wire PT-46 |
Scan Time | Adjustable 1 -20 Sec. |
Display | 4 Digit For Parameter 2 Digit For Channel 2 Digit For Function |
Alarm | Individual Alarm |
Alarm Contacts | NC-C-NoContact |
Alarm Indicator | Common For All Channel |
Power Supply | 127V AC, 50Hz |
Sensor Open Indication | Open Message |
Sensor Short Indication | Short Message |
Zero Check | Provided |
Cal Check | Provided |
Signal Check | Provided |
Signal Reset | Provided |
Output | Common Relay |
We are engaged in manufacturing and supplying Remote Monitoring System. Our range is manufactured by using qualitative raw material as per auto-cad drawing. Besides, these are duly powder coated and are available in various sizes. We provide product after testing them to ensure their faultless delivery to the clients. Our range is manufactured by using qualitative raw material as per auto-cad drawing. Besides, these are duly powder coated and are available in various sizes.
Features: