Temperature Controllers

Owing to our vast experience of the industry, we are offering Digital Temperature Indicator Cum Controller. The entire range of finished products is stringently checked and tested by our quality controllers to ensure its flawlessness. The Indicators are used in a wide foray of industries and machines to display accurate and precise Temperature values.

Technical Specifications:

• Models: MS-D - Digital Temperature Indicator, MS-D 1 - Digital Temperature Indicating Controller with 1 Set Point, MS-D 2 - Digital Temperature Indicating Controller with 2 Set Point
• Sensor/Input: Any one of the following inputs can be offered, (confirm type of Input and Range while ordering) Input Sensor Type: J X T K R PT 100 inn
• Range: 0-400, 0-1200, 0-400, 0-1000, 0-1700, -50 To 300
• Optional Input : 4 to 20mA - fl C, Kg/cm, RPM, PH, %, Bar
• Resolution : 0.1 up to - 200°C to + 200°C, 1 above 200°C
• Accuracy: For R Type Thermocouple Accuracy will be +1-1 % FSD +/-1 Digit While Ordering specify operating Range of Temperature for J, K, T, E, R, RTD, a narrow calibration span will ensure better accuracy of the order of 0.5%, in the operating range. For 4 to 20 mA Input Accuracy- 0.2% FSD 1 Digit
• Display: 3 1/2 Digit 12 mm Seven Segment LED Display, RED. Optional GREEN / ORANGE
• Ambient Temperature : 0 to 60°C
• Humidity: 90 % RH
• Supply Voltage: 110 VAC/240 VAC 10 % 50Hz, ( D.C. Voltage or 24 VAC on request)
• Power Consumption: 5 VAC maximum at 240 VAC.
• Set Point: Adjustable by Potentiometer throughout the Range, Maximum 2 Set Points, Additional Set points on request.